ALL MOBILE Secret codes

[abdulsaboor]

Nokia 3310 Secret codes



#06# To find IMEI (International Mobile Equipment Identity)

*#7780# Restores Factory Settings..(Memory, language, counters not included)

*#3110# For checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] To check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time)


*#92702689# [*#war0anty#] Phone asks 'warranty code:'

6232 (OK) Displays the Month and Year of Manufacture

9268 (OK) Displays Serial Number

7332 (OK) Displays the date of the last repairment - if found

7832 (OK) Displays (if found) the date where the phone was purchased

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!)

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

[abdulsaboor]

General 8810 Secrets/Codes

IMEI number
*#06#

Software Version
*#0000#


1st Line - Software Version
2nd Line - Date of Software release
3rd Line - Phone Type.

Serial Number
*#92702689#

1st Screen - Date of phone manufacture
2nd Screen - Serial #, IMEI
3rd Screen - Purchasing date
4th Screen - Last Repair Date.

[abdulsaboor]

Nokia 101 cell phone lockcode

Nokia 101 cell phones set up by Bell Mobility in Toronto can have their lock code circumvented by the following method:

Type: * 3001 # 12345 [STO] 00
Wait for: NOT DONE
Type: [RCL] 01


Clear old lock code (the last four digits) and enter a new lock code. Be very careful not to delete other characters.

Type: [STO] 01 [STO]
Turn power off.

[abdulsaboor]

Nokia 1610/1611, 2010, 3210, 3810, 6080/6081, 6120/6160/6162, 6150, 6190, 7110, 8850, 9000/9000i, 9110


Nokia 1610 / 1611

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#170602112302# shows the SW version.

Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX - older version V 4.19
Latest software version on Nokia 1611: V 4.03 NHE-5SX

Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#

Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

V.4.41 NSE-8/9 (17-08-99)0
V 4.11 (???)
V 3.10 NSE-8

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6080 / 6081

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version on 6080 V 4.80 NHE-2
Latest software version on 6081 V 5.14 NHE-2A

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version.

Nokia 6150

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#92702689# to enter service menu.

Latest software version 5.22 (10-11-99) NSM-1

Older versions:
5.20 (20-09-99) NSM-1
5.17 (01-07-99) NSM-1

Updates:
1. Updated GSM-list
2. *4720# and #4720# (activate/deactivate Halfrate) doesn't work anymore!
3. New menu option: 4-4-6 Confirm SIM service actions Lets you select whether SIM service actions are visible and confirmed by you.
4. Automatic menu-language selection doesn't work anymore!

V 5.02 (02-02-99) NSM-1
V 4.13 NSM-1 (EFR option should be back in this version)
V 4.12 NSM-1 (EFR option removed in this version)
V 4.11 NSM-1 (EFR option removed in this version)
V 4.02 NSM-1

Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with this version.

V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5

Nokia 8850

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.

Latest software version: V 5.11 09-12-99 NSM-2

Older version: V5.08

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

V 4.05 RAE-2

[abdulsaboor]

Nokia 2110i

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

To view Week and Year of manufacture enter *#3283# [*# D A T E #]

The last two digits are the year. If the year is 95, the first two digits are the month. For 96 the first two digits are the week of the year.

To view the software version on 2110e / 2110i enter *#170602112302# or *#9999#
On newer phones, the code has been changed to *#682371158412125#

Service Prover Lock
The service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code - SO DON'T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it's only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Bypass the SP lock
With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:
1: Insert sim card of diferent provider.
2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?
3: Press the "C" key.
4: Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#


The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !

Cell-sites
To enable display of cell-site names, [MENU] 4 9 1

Received calls
To see received calls. Same As menu options (012)
Enter : * then Memory then Find or * then the down arrow Missed calls

To see missed calls
Same as menu option (01 3)
Enter : + then Memory then Find or + then the down arrow

DTMF tones
Pressing Menu, then Green Phonebutton allows you to transmitt DTMF tones

Carkit Programming
If you use a carkit with handsfree AND additional handset, and you want to switch from handset to handsfree: Press the left menu button, and put the additional handset on hook. Now you are on handsfree

[abdulsaboor]

Nokia 2160 Series Cellular Telephone Programming

The Nokia 2160 series hand portable CMT uses an EEPROM NAM that can be
programmed directly from the standard user keypad. In order to access the
NAM, you must enter the special access code currently programmed into the
phone. Once the programming mode is accessed, NAM parameters are loaded
by entering them into the display and "storing" them to selected memory
locations. Be sure to obtain all parameters before proceeding.

EASY NAM PROGRAMMING

1. Turn on phone.

2. Enter the Easy NAM access code. Access code is: *#639#

3. Verify the display now reads "Cellular Number" and enter the 10 digit
MIN for the phone.

4. Press the softkey under the word "OK" in the display. If less than 10
digits are entered an error message will prompt you to reenter the
number.

5. Verify the display reads "Enter code" and enter the five digit SID
followed by four zeros. (Example 001750000 is a SID of 175 followed
by four zeros). An error message will display if an incorrect entry
is made. Do not add more than four zeros to the code.

Note: Change the Lock code by adding a pound sign and new lock code after
the code. (Example: 001750000#7788. Lock code = 7788).

Change the Language code by adding a pound sign (#) and new
language code after the code. (Example: 001750000#2. Language = 2)

Language Code: 0 (default) = English, 1 = French, 2 = Spanish,
3 = Portuguese

Change the Lock code and Language code by separating each set of
numbers by a pound sign. (Example: 001750000#7788#2). The SID =
00175, Lock code = 7788, Language = 2 (Spanish).

6. Press the softkey under the word "OK" in the display.

7. The display will tell you that the activation was OK and instruct you
to power the phone off, then on again. When the phone powers back up,
it will automatically select the correct system (A or B).

ACCESS NAM PROGRAMMING MODE:

1. Turn the phone on.

2. Enter the NAM access code. Factory default is: *3001#12345

3. Enter softkey [MENU].

4. If this screen appears, you have entered the access code correctly:
____________
| Field Test |
| >NAM 1 |
| NAM 2 |
|____________|

SELECTION FROM THE MAIN LEVEL MENU (FIRST LEVEL OF NAM MENU):

5. Press the scroll key up or down repeatedly until the desired main menu
selection is displayed. Select from:

NAM 1 NAM 2 NAM 3
Serial No. Programmed Field Test

Security Code Emergency Number SW Version

6. Press softkey [SELECT] to access the second level menu for your main
menu selection.

PROGRAMMING NAM's 1 THROUGH 3 (SECOND LEVEL OF NAM MENU):

7. Press the key up or down to scroll through the selected NAM
information list. Select from:

HOME SYSTEM OWN NUMBER PSID/RSID LISTS (Note 1) CHANGE DEFAULTS

"CHANGE DEFAULTS"

NAM STATUS ACCESS METHOD LOCAL OPTION PRIMARY PAGING CH

SECONDARY PAGING CH DEDICATED CCH A DEDICATED CCH A NBR DEDICATED CCH B
DEDICATED CCH B NBR OVERLOAD CLASS GROUP ID ROAMING STATUS
A-KEY

8. If the value is incorrect, press softkey [SELECT] and use the numeric
keypad or key to make any needed changes.

9. Enter softkey [OK] to save the value.

10. Repeat steps 7 through 9 for the remaining NAM info items to be viewed
and/or changed.

11. To program other NAM's, press [QUIT] to return to the Main Level Menu
list. Select NAM 2 or NAM 3. Once the Home System ID and Own number
are programmed, the phone will automatically set the NAM Status to
enabled.

PROGRAMMING THE SECURITY CODE:

12. From Main Level Menu use the key to select the "Security" menu, press
[SELECT] and the current 5-digit security code will appear in the
display. Default is 12345.

13. If you wish to change the Security code at this time, use the numeric
keys to change the value.

14. Press the softkey [OK] to store changes.

PROGRAMMING EMERGENCY NUMBERS:

15. From Main Level Menu use the scroll key to select the "Emergency"
menu. Press softkey [SELECT] to enter the emergency numbers.

EMERGENCY NUMBER 1 (911) EMERGENCY NUMBER 2 (*911)
EMERGENCY NUMBER 3 (None)

16. If you wish to change the displayed value, use the numeric keys to
make changes. Use the scroll key to select the emergency number you
wish to change and press [SELECT].

17. To save the value, press softkey [OK].

18. Press [QUIT] to exit the menu.

SW VERSION:

19. From the Main Level Menu use the scroll key to display the "SW
version" menu, press [SELECT] to view software version, date and
product type.

20. Press [QUIT] to exit the menu.

SERIAL NUMBER (ESN):

21. From the Main Level Menu, use the scroll key to display the "Serial
No." or ESN of the phone.

22. Press [QUIT] to exit the menu.

PROGRAMMED: (DATE THE PHONE IS FIRST PROGRAMMED)

23. From the Main Level Menu, use the key to display the "Programmed" menu.

24. Press [SELECT] and enter a four digit number that corresponds to the
month and year the phone is sold. Example (mmyy) 0197 = January 1997,
0996 = September 1996.

Note: This menu location can be programmed only one time. Once the date
has been entered it cannot be changed. Any attempt to enter the
menu once it has been programmed will receive a short beep and the
message "DATE ALREADY STORED".

EXITING NAM PROGRAMMING:

25. To exit the NAM programming mode, turn the phone off and leave it off
for five seconds.

FIELD TEST:

26. The FIELD TEST MODE is used to investigate how the phone is reacting
to the cellular system. The FIELD TEST information covers signal
strength, battery charging, cellular state and encryption status. The
information is organized to display information relating to Analog
Control Channels, Digital Control Channels, Analog Voice Channels and
Digital Voice Channels. All the information provided in the FIELD
TEST display is in accordance with IS-136.

For further information about the FIELD TEST mode, contact Nokia
Customer Service at 1-800-456-5553 and ask for Nokia Field Service
Bulletin ?????.

27. To activate the FIELD TEST mode you must be in NAM programming.
Instructions for entering NAM programming are listed above. Use the
following steps to enable the FIELD TEST mode.

28. From the main menu use the scroll key to display the "FIELD TEST" menu
and press the softkey [SELECT]. Use the key to select ENABLE and
press the softkey [OK].

29. Turn the Nokia 2160 off then back on. Once the power up self test is
complete, the FIELD TEST display will begin automatically. Scroll
through the different displays using the scroll key.

30. To disable the FIELD TEST mode, return to NAM programming and disable
the function under the FIELD TEST menu.

PROGRAMMING PSIDS AND RSIDS:

The Nokia 2160 provides the option to program Private (PSIDs) and
Residential (RSIDs) System ID's as prescribed by IS-136. The PSID/RSID
list is programmed to support selection/reselection processes, system
selection, and SID display functions. Programming the PSID/RSID list is
part of the NAM programming menu. All three NAMs have their own PSID/RSID
list. Follow these instructions to program the PSID/RSID lists.

1. Enter the NAM programming menu and select NAM 1 (or the desired NAM).
(NOTE: PSID/RSID is currently only available in the NAM 1 location.
PSID/RSID is included in NAM 2 and 3 for future use.)

2. Use the scroll key to display "PSID/RSID LISTS" and press [SELECT].

3. Use the scroll key to select the P/RSID 1 or the desired P/RSID (1
through 5). Press the [SELECT] softkey.

4. Each list contains:

System type Select Private or Residential system type.

PSID/RSID System ID for the Private or Residential system.
Indicates which PSID/RSID the mobile will respond
to.

System ID Connected System ID. The SID the PSID/RSID is
connected to.

Alpha Tag The name of the Private or Residential SID.

Operator Code(SOC) This is the System Operator code. (US-McCaw
Cellular = 001 (dec), Canada-Rogers Cantel Inc.
= 002 (dec) and McCaw Cellular Communications (for
international) = 2049 (dec).

Country Code Enter the country code of the PSID/RSID.

[abrar shah]

pls. giv me master password of sonyericsson k300i
when i on the phone ...apear phone lock code